tc-bangkok:
beim code auslesen kommt das : (finde im Internet keine Info)
Retreaving fault codes – Using odometer button (2004-current models)
This method works for 2004 to 2013 year models. Move your kill switch to the run position. Press and hold the black odometer reset button and turn the ignition switch to the ignition position. Hold the reset button until the message "DIAG" appears. Press and release the odometer button to access the module selection menu. The message "P55PtB" will appear. The letters and numbers stand for the different systems. Press and release the odometer button to move through the message characters. The first character "P" stands for PCM (powertrain control module). Press and hold the odometer button to access the PCM codes once the "P" is flashing. If a code is present, the code will display. Record the code number to research possible causes. Press and hold the odometer button to clear the code, and then shut off the ignition to exit the menu. Repeat the process to check the other systems.
__________________
Gruß
Karl
Dieser Beitrag wurde schon 1 mal editiert, zum letzten mal von Karl H. am 25.01.2023 09:37.