Daten aus dem 08' manual:


obere und untere Federbeinaufnahmen (41 - 47NM)

fork tube and slider assemblies
through lower triple clamp and upper triple clamp. fork
tubes should project above upper triple clamp, 6.4-9.7
mm (0.25-0.38 in.). Tighten pinch bolts to 41-47 Nm (31-
34 ft-lbs).

Riser Schrauben (41-47NM)
Install cast riser on upper triple clamp. Tighten fasteners
to 41-47 Nm (31-35 ft-lbs) .

klemmbock fuer die Lenker befestigung (16-20NM)

6. Tighten rear fasteners to 16-20 Nm (144-180 in-lbs).
7. Final tighten front fasteners to 16-20 Nm (144-180 in-lbs).
Slight gap between upper and lower clamps should exist
at rear.

Gruss